Instructions / Assembly

6
Step 9: Right Door Assembly
20
AAV20
You will need for this page:
9905
Horizontal
Door Brace
2
11045
1
Door Handle
Brace
11046
Door Panel
1
9905
11045
9905
11046
(QTY: 12)
11047
Diagonal Door
Brace
4
(QTY: 1)
67236
Adhesive Pad
1
Start assembly by sliding the Door Handle
Brace into the middle of the Door and securing it
with four (4) Screws. Then attach the Horizontal
Door Braces to each end of Door using two (2)
Screws on each brace. Once installed, attach
Adhesive Pad between leg of Door Handle
Brace and Door.
1
11045
11046
67236
Place the ends of Diagonal Door Braces
with small holes under Horizontal Door
Braces as shown. Secure all Diagonal Door
Braces to center of Door Handle Brace
using one (1) Tapping Screw. Attach all
Diagonal Door Braces under Horizontal
Door Braces using four (4) Screws at each
corner as shown.
2
Make sure holes in Door Handle Brace
are on same side as holes in Door.
Diagonal Door Braces attach from behind
Horizontal Door Brace.
66692
11047
11047
11047
11047
Large holes of Diagonal
Door Braces go to center.
11047
9905