Installation Guide

 3719 Door Handle Brace (2)
 10489 Right and Left Doors (2)
 10497 Horizontal Door Brace (4)
 9355 Vertical Door Brace (2)
 Parts Needed For 
Door Assembly
Step 17
A30 ctr
STEP
1
STEP
66382
END VIEW
SHOWING:
Horizontal
Door Brace
Door
Washer
Guide
STEP
6
STEP
3
10489
Right Door
10497
10489
Left Door
9355
10497
66382
9355
3719
66382
66045
3719
66382
66045
9355
66382
3719
10497
STEP
5
STEP
10497
2
4
66045
The steps on this page tell how to
assemble the right door. You will
perform exactly the same procedures
for the left door. Each bolt and screw in
the door requires a washer. Proceed
as follows:
1 Attach the door handle brace
and handle to the door with 1 bolt
as shown. Don't tighten the bolt yet.
2 Swing the door handle brace up
to the hole on the center of the door
and insert a screw.
3 Hold the vertical door brace
against the center of the inside
surface of the door and turn the screw
to hold the vertical door brace and
door handle brace in place. Fasten
to door above and below center
connection using 2 screws.
4 Insert a second bolt in the door
handle and tighten both bolts.
5 Put a horizontal door brace onto
the top edge and bottom edge and
fasten with 1 bolt in the center.
6 Attach the lower door guides and
bolts as shown.
7 Repeat steps 1 through 6 for the
left door.
(6)
(12)
(4)
30