Specifications

Black plate (70,1)
[ Edit: 2012/ 4/ 11 Model: Z34-D ]
2-8 Instruments and controls
located on the passenger’s side of the vehicle.
CAUTION
. If the vehicle runs out of fuel, the
malfunction indicator light (MIL)
may come on. Refuel as soon as
possible. After a few driving trips,
the
light should turn off. If the
light remains on after a few driving
trips, have the vehicle inspected by
a NISSAN dealer.
. For additional information, see
“Malfunction Indicator Light (MIL)”
(P.2-14).
SIC4003
Triple meter
1. Engine oil temperature gauge
2. Voltmeter
3. Clock
TRIPLE METER
GUID-BEB58E55-F6B7-41B0-833B-0CAAD5B4F8B8
Engine oil temperature gauge
GUID-44274047-D060-47F5-A00B-20A799AA2757
Oil temperature, as well as the rate of
temperature change, will vary based on
ambient conditions and driving patterns.
Under normal operating conditions, oil
temperature will remain below 2808F
(1408C).
If the engine oil temperature gauge
*
1
indicates more than 2808F (1408C) while
driving, reduce the engine speed (RPM).
When the engine oil temperature is high,
the engine protection mode, which helps
reduce the chance of engine damage,
could activate and automatically decrease
engine power.
Voltmeter
GUID-609889CD-E5DF-4590-8E80-A6657A493AA2
When the ignition switch is turned to the ON
position, the volt meter
*
2
indicates the battery
voltage. When the engine is running, it indicates
the generator voltage.
While cranking the engine, the volts drop below
the normal range. If the needle is not in the
normal range (11 to 15 volts) while the engine is
running, it may indicate that the charging system
is not functioning properly. Have the system
checked by a NISSAN dealer.
Clock
GUID-879883DE-B11E-430D-B0A2-0F8D8EBE2D2C
If necessary, adjust the clock
*
3
on the setting
screen of the vehicle information display. (See
“CLOCK” (P.2-25).)
If the power supply is disconnected, the clock
will not indicate the correct time. Readjust the
time.
Information Provided by: