Use and Care Manual

ManualsBrandsArrow ManualsMetal ShedsLexington 10 ft. x 14 ft. Eggshell High Gambrel Galvanized Steel Storage Shed

 6515 Wall Panel (10)

 Parts Needed For 

Wall Panels

Step 9

SO22 ctr

Each wall panel has a crimped rib

on one side. The crimped rib should

go under the rib of the panel that

follows it.

1 Locate all of the wall panels and

set each one alongside the building.

2 Fasten the wall panels at the top

and bottom with screws.

3 Fasten the center of each panel to

the wall channel with screws.

4 Fasten overlapping ribs as before.

STEP

1

3

STEP

4

STEP

6515

Bolt and nut

does not go

thru wall

channel at

overlap

Panels rest on

frame as shown

6515

Crimped Rib

Underneath

2

STEP

Detail Showing

Center of

Panel Screwed

to Wall Chan-

nel

Use bolts and nuts

thru wall angle

overlap at the top

of panel at rear.

(144) (15)

22