Instructions / Assembly

ManualsBrandsArrow ManualsStorage & OrganizationNewport 8 ft. x 6 ft. Steel Shed

Step 10

B23et ctr

 Parts Needed For 

Gable Assemblies

 7906 Right Gable (2)

 7907 Left Gable (2)

 7916 Roof Beam Bracket (4)

CAUTION:

STEP

1

7916

Roof Beam

Brackets

Washer

7907

7906

FRONT

(8)

The gables go on top of the front and

rear walls to support the roof beams.

NOTE

The gables are packed nested

together and might be mistaken

as one piece. Carefully separate

them before continuing.

1 Apply edge trim to the top edge

of the right gables and left gables.

2 Attach the four roof beam

brackets to the gables using two

bolts, washers and nuts.

NOTE

Mounting leg of bracket must

face toward center of gable.

To avoid mishap on the sharp

edge the edge trim must remain

in place on the top edge of the

gable until right and left roof

panels are in place.

Edge Trim

(Plastic Piece)

STEP

2

7907

23