Instructions / Assembly

Step 4
BL14
● Parts Needed For ●
Roof Channel
Assembly
14
Get help holding post in place while
attaching the roof channel.
1 Position a roof channel, with small
hole 1 1/8" (2,9 cm) from end at left
post, and fasten to channel brace us-
ing four #10-32x 7/16" (11 mm) bolts
and square nuts. Fasten other end to
the top end of the left post, noting
location of lock seam, using two #10-
32x7/16" (11 mm) bolts and square
nuts, and two #10Ax3/8" (10 mm)
screws.
2 Fasten a roof channel, with small
hole 1 1/8" (2,9 cm) from end, to the
front of left post, using the same fasten-
ers, with opposite end overlapping
center post by 1 1/2" (3,8 cm), fasten
as before. Brace center of unit with
2x4's (38 mm x 89 mm) as shown.
3 Repeat procedure with next roof
channel, to center and right post.
4 Repeat procedure with next roof
channel, as done in Step 1 to right post
and channel brace.
●●
●●
● 9656 Roof Channel (four)
●●
●●
● Post Assemblies (three)
#10Ax3/8"
(10 mm) Screw
9656
#10-32x7/16"
(11 mm) Bolt
(2,9 cm)
Lock Seam
9661 Left Post
#10-32 Square Nut
9656
STEP
1
STEP
2
1 1/8"
(2,9 cm)
9671 Center Post
1 1/8"
(2,9 cm)
1 1/8"