Instructions / Assembly

If the locality where you have installed the
patio cover/carport could benefit from a gut-
tering system, we recommend the following
list of materials, (not included).
● ●
● ●
● Two 10' (304,8 cm) gutters with splice
or
● ●
● ●
● One 20' (609,6 cm) gutter
● ●
● ●
● One downspout
● ●
● ●
● One outlet
● ●
● ●
● One right & One left end cap
● ●
● ●
● Sealant
● ●
● ●
● Nine hidden hangers
with nine 1 1/2" (38 mm) bolts and nuts
● ●
● ●
● Three standard elbows
● ●
● ●
● Two bands
with four sheet metal screws
1 Assemble the gutter on the ground using
sealant.
2 Temporarily remove top front trim, lift as-
sembly to unit and mark top left and right end
trim where gutter meets trim. Remove gutter
system and notch (using tin snips) top L&R
end trim so gutter fits flush along front of unit.
3 Evenly space out five hidden hangers in
gutter, making sure one is in the outlet. Attach
gutter assembly to front facia/ front roof chan-
nel using five 1 1/2" (38 mm) bolts and nuts
through hidden hangers. Replace top front
trim.
4 Assemble the downspout on the ground.
5 Hold in place on outlet. Attach to post with
two bands. Drill 3/32" (2 mm) holes and fasten
with sheet metal screws.
Suggested Guttering System (not included)
BL23
23
Outlet
Gutter
Left End Cap
Elbow
Elbow
Elbow
Downspout
Band
Post
Screw
Top Front Trim
Top End Trim
1 1/2" (38 mm) Bolt
Nut
Notch
Hidden Hanger
Gutter