Installation Guide

 Front Floor Assembly (1)
 Side Floor Assembly (2)
 Rear Floor Assembly (1)
 Parts Needed For 
Floor Frame
Step 5
SW18 ctr
The  oor frame must be square
and level or holes will not align.
1 Assemble the four corners of
the  oor frame using two screws at
each corner as shown. At the front
corners fasten bolts through from
the bottom with nuts on top.
2 Measure the  oor frame diagonally.
When the diagonal measurements
are equal, the  oor frame is square.
NOTE
If using a wood platform or
concrete slab do not fasten the
 oor frames to your base at this
time. You will anchor the
building after it is erected.
STEP
1
10392
RIGHT
REAR
8936
Level
10392
RIGHT
FRONT
9367
STEP
2
When Diagonal Measurements
are Equal the Floor Frame
is Square.
FRONT
(8) (2)
18