Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationDallas 10 ft. x 12 ft. Vinyl-Coated Steel Storage Shed with Floor Kit

 9344 Siding Stud (10)

 9365 Front Wall Channel (2)

 Parts Needed For 

Studs/Front Channel

Step 10

SX23 ctr

DO NOT FASTEN TAB

AT THIS TIME

LARGE HOLE

9365

The studs provide a surface for at-

taching the siding panels.

1 Following dimensions, measur-

ing from the ends of angles place

2 studs between each corner and

splice post on the sides and 1 on the

rear of building. Position stud inside

top angle and fasten with a screw at

the lower hole.

9365

1

STEP

2

STEP

3

STEP

FASTEN STUD AT

LOWER HOLE

FRONT

47 9/16" (120,8 cm)

21 15/16" (55,7 cm)

29 3/16"

(74,1 cm)

2 Rest bottom tab (large hole)

outside  oor frame. Do not fasten

tab at this time. Repeat procedure

for the remaining studs around the

building.

3 Fasten front wall channel into

position behind corner post and door

jamb. Fasten using three screws.

(12)

(4)

23