Installation Guide

 3719 Door Handle Brace (2)
 10472 Right and Left Doors (2)
 10497 Horizontal Door Brace (4)
 6301 Vertical Door Brace (2)
 Parts Needed For 
Door Assembly
Step 20
SX33 ctr
The steps on this page tell how to
assemble the right door. You will per-
form exactly the same procedures for
the left door. Each bolt and screw in
the door requires a washer. Proceed
as follows:
1 Attach the door handle brace
and handle to the door with 1 bolt
as shown. Don't tighten the bolt yet.
2 Swing the door handle brace up
to the hole on the center of the door
and insert a screw.
3 Hold the vertical door brace
against the center of the inside sur-
face of the door and turn the screw
to hold the vertical door brace and
door handle brace in place. Fasten
to door above and below center
connection using 2 screws.
4 Insert a second bolt in the door
handle and tighten both bolts.
5 Put a horizontal door brace onto
the top edge and bottom edge and
fasten with 1 bolt in the center.
6 Attach the lower door guides and
bolts as shown.
7 Repeat steps 1 through 6 for the
left door.
STEP
6301
STEP
STEP
5
4
3
10472
Right Door
66382
66382
10497
66045
3719
66382
END VIEW
SHOWING:
Horizontal
Door Brace
Door
Washer
Guide
6301
3719
10472
Left Door
66045
66045
3719
STEP
1
STEP
2
STEP
6
10497
10497
10497
66382
66382
6301
(6) (12)
(4)
33