Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationDallas 10 ft. x 6 ft. Vinyl-Coated Steel Storage Shed with Floor Kit

The door jambs reinforce the door

opening and provide an attractive

trim. The splice post supports the

rear wall.

1 Position splice post at the center

of the rear wall and fasten using 4

bolts and nuts into rear wall angle

and 2 screws into rear  oor frame.

Hint: Measure or count holes to

determine if post is centered on rear.

2 Fasten the top of the door jambs

to the door track with two screws. Do

the same for the bottom into frame.

Notched edge faces toward center

of building.

 5287 Splice Post (1)

 7311 Door Jamb (2)

 Parts Needed For 

Splice Post/Door Jamb

Step 7

X20

5287

1

STEP

STEP

2

NOTCHED EDGE

MUST FACE CENTER OF

BUILDING

FRONT

FRONT

Washer

7311

7311

20