Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationDallas 10 ft. x 6 ft. Vinyl-Coated Steel Storage Shed with Floor Kit

1 Lift and fasten a right and left

gable, under angle at corner, to

the rear wall angle with screws.

Hint: On the rear gable, use a bolt

and nut at the overlapping rear wall

angle. On the front gable, leave out

2 screws closest to center gable leg.

2 Join the left and right gables

together with a gable brace using a

bolt and nut in the bottom hole only.

3 Repeat Steps 1 & 2 for the door

track on the front of building, except

for the track supports, fasten as

shown.

 Left Gable Assemblies (2)

 Right Gable Assemblies (2)

 6635 Gable Brace (2)

 Parts Needed For 

Gables/Braces

Step 12

X25 ctr

STEP

2

STEP

3

STEP

1

6635 Gable Brace

Track Supports 6228

Gable

(20) (5)

25