Installation Guide

1 Install the ridge cap on the com-
pleted roof section using bolts. Do
not fasten the ends of the ridge cap
until instructed to do so.
2 Fasten the lower end of the panels
to the side wall angles using screws
and washers.
 8461 Ridge Cap (1)
 8482 Side Roof Trim (2)
 Parts Needed For 
Ridge Cap/Roof Trim
Step 16
W29
STEP
1
STEP
2
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
8461
Side Roof Trim
Peak Cap
5
STEP
STEP
3
8482
6
3 Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
4 Using your thumb and index  nger,
overbend the bottom  ange of the side
roof trim at the corner inward enough
so the right and left roof trim caps  t
onto right and left corners.
5 Fasten the roof trim caps to the
side trim using a screw.
6 Fasten the roof panel rib, peak
cap and ridge cap together using
bolts and nuts. Fasten the remain-
ing peak cap in the same manner.
Roof Trim Cap
8482
STEP
4
STEP
29