Installation Guide

1 Slide side siding into channels
of corner and splice posts,  at edge
upward, bottom edge down rest-
ing on floor frame. Always follow
this pattern. Fasten bottom edge
and tab of stud to  oor frame using
screws. Fasten center to stud with
screws. Do not fasten  at edge yet.
2 Install side siding as before.
Note how the slot in bottom edge
must overlap  at edge of last siding.
Fasten both siding panels to stud at
this overlap.
3 Install side siding to the top as
before.
4 From inside building, fasten siding
to corner posts and splice post using
screws.
5 Repeat steps 1 through 4 for op-
posite side of building.
NOTE
Be careful to install the correct
panel in each position as shown.
The  oor frame must be square
and level or holes will not align.
 8584 Side Siding (12)
 Parts Needed For 
Side Siding
Step 9
Y22 ctr
THIS SCREW MUST
FASTEN TAB OF STUD
STEP
2
STEP
3
Be certain all Siding
overlaps are fastened
with a single screw
Washer
8584
8584
End
View
Flat
Edge
Bottom
Edge
FRONT
STEP
1
STEP
4
8584
Fasten
At Upper
Hole
STEP
5
Each screw and bolt in the wall
requires a washer.
CORRECT
INCORRECT
(48)
(28)
22