Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationDallas 8 ft. x 6 ft. Vinyl-Coated Steel Storage Shed with Floor Kit

 Front Floor Assembly (1)

 8946 Side Floor Frame (2)

 Rear Floor Assembly (1)

 Parts Needed For 

Floor Frame

Step 5

B18 ctr

The  oor frame must be square

and level or holes will not align.

1 Assemble the four corners of the

 oor frame using two screws at each

corner as shown. At the front corners

fasten bolts through from the bottom

with nuts on top.

2 Measure the  oor frame diagonally.

When the diagonal measurements

are equal, the  oor frame is square.

NOTE

If using a wood platform or

concrete slab do not fasten the

 oor frames to your base at this

time. You will anchor the building

after it is erected.

STEP

1

9377

RIGHT

REAR

8946

8946

Level

RIGHT

FRONT

9379

STEP

2

When Diagonal Measurements

are Equal the Floor Frame

is Square.

FRONT

8946

8946

(8) (2)

18