Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationDallas 8 ft. x 6 ft. Vinyl-Coated Steel Storage Shed with Floor Kit

1 Lift and fasten a right and left

gable, under angle at corner, to

the rear wall angle with screws.

Hint: On the rear gable, use a bolt

and nut at the overlapping rear wall

angle. On the front gable, leave out

2 screws closest to center gable leg.

2 Join the left and right gables

together with a gable brace using

a bolt in the bottom two holes only.

3 Repeat Steps 1 & 2 for the door

track on the front of building, except

for the track supports, fasten as

shown.

 Left Gable Assemblies (2)

 Right Gable Assemblies (2)

 6658 Gable Brace (2)

 Parts Needed For 

Gables/Braces

Step 12

W25 ctr

STEP

2

STEP

3

STEP

6658 Gable Brace

Track Supports 6228

Gable

1

(24)

(7)

25