Installation Guide

723380817
SOME FACTS ABOUT RUST
Rusting is a natural oxidizing process that occurs
when bare metal is exposed to moisture. Problem
areas include screw holes, unfinished edges, or
where scrapes and nicks occur in the protective
coating through normal assembly, handling and use.
Identifying these natural rusting problem areas and
taking some simple rust protection precautions can
help to stop rust from developing, or stop it quickly
as soon as it appears.
1. Avoid nicking or scraping the coating surface,
inside and out.
2. Use all the washers supplied. In addition to
protecting against weather in ltration, the washers
protect the metal from being scraped by the screws.
3. Keep roof, base perimeter and door tracks free of
debris and leaves which may accumulate and retain
moisture. These can do double damage since they
give o acid as they decay.
4. Touch up scrapes or nicks and any area of visible
rust as soon as possible. Make sure the surface is
free of moisture, oils, dirt or grime and then apply
an even  lm of high quality touch-up paint.
Anchoring
Anchor your building at this time.
Floor Frame
If you have purchased a Floor Frame Kit you need to install it at this time.
Anchoring and Floor Frame
BT32
ED86
WR86
WR86EU
ED86Z
SBVD86 A
697.68616 A
VD86
VD86EU
VDGY86
VDGY86EU
ED86BS ED86LG
ED86SB
WR86H6