Specifications

(22) Remove the hood latch support brackets from
the vehicle.
(23) Remove the upper fan shroud retaining bolts.
(24) Remove the radiator crossmember from the
vehicle.
(25) Remove the manual cooling fan and let set
inside of the fan shroud.
(26) Remove the intercooler inlet and outlet hoses
from the vehicle (Fig. 8).
(27) Disconnect the breather hose and remove the
fresh air inlet tube from the vehicle (Fig. 9).
(28) Remove the radiator overflow hose from the
radiator
(29) Remove the upper radiator hose from the
vehicle.
(30) Disconnect the electric radiator cooling fan
electrical connector.
(31) If equipped, recover the refrigerant. Refer to
Group 24, Heating and Air Conditioning for the pro-
cedure.
(32) Remove the intake air duct from the vehicle
(Fig. 10).
(33) Remove the power steering cooler retaining
bolts (Fig. 10) and position the cooler aside.
(34) Remove the suction and discharge lines from
the condenser assembly (Fig. 10).
(35) Remove the fan shroud and both cooling fans
as an assembly from the vehicle.
NOTE: The cooling module assembly includes the
radiator, intercooler and A/C condenser.
(36) Remove the cooling module assembly retain-
ing bolts and remove the cooling module from the
vehicle.
(37) Remove the coolant reservoir supply hose
from the engine .
(38) Remove the coolant recovery hose from the
water manifold.
(39) Remove the EGR valve vacuum supply line
from the valve (Fig. 11).
Fig. 8 Intercooler Hoses
Fig. 9 Air Intake Hoses
Fig. 10 Cooling Module Assembly
WJ ENGINE 9 - 15
REMOVAL AND INSTALLATION (Continued)