Specifications

(40) Remove the heater core coolant supply lines
from the engine assembly (Fig. 11).
(41) Remove the refrigerant line from the A/C
accumulator assembly.
(42) Disconnect the oil pressure and boost pressure
sensor electrical connectors and unclip wire harness
from the coolant supply lines.
(43) Disconnect the engine ground. Located just
behind the oil filter.
(44) Remove the refrigerant line retaining nut
from the bulkhead and remove the refrigerant liquid
line from the vehicle.
(45) Cut the tiestraps retaining the wire harness
to the refrigerant line. Located above the compressor
assembly.
(46) Remove the refrigerant line support bracket
bolt from the cylinder head cover.
(47) Remove both of the refrigerant line retaining
bolts from the compressor and remove the lines from
the vehicle.
(48) Remove the power steering fluid supply hose
from the pump (Fig. 12).
(49) Remove the power steering fluid pressure line
from the pump (Fig. 12).
(50) Remove the vacuum supply hose from the
engine mounted steel vacuum source line.
(51) Disconnect the generator field wire connector
from the rear of the generator.
(52) Unclip the battery feed wire cover and remove
the wire from the top of the generator.
(53) Disconnect the speed control servo vacuum
supply hose from the engine mounted steel vacuum
source line.
(54) Disconnect the fuel supply and return hoses
from the engine assembly.
(55) Remove the wire harness mounting bracket
retaining nuts from the left engine mount (Fig. 13).
(56) Disconnect the black and gray 10–way electri-
cal connectors from the engine wire harness.
(57) Disconnect the A/C compressor clutch and
glow plug harness electrical connectors.
Fig. 11 Engine Compartment View - Rightside Fig. 12 Power Steering Fluid Lines At Pump
Fig. 13 Wire Harness Mounting Bracket
9 - 16 ENGINE WJ
REMOVAL AND INSTALLATION (Continued)