Specifications

(76) Remove the left engine mount sill plate
retaining bolts (Fig. 20).
(77) Remove the right engine mount sill plate
retaining bolts (Fig. 21).
(78) Set up an engine lifting device and support
the weight of the engine assembly.
CAUTION: Before proceeding be certain the front of
the transmission is properly supported with a jack.
CAUTION: This engine is equipped with a misfire
sensor. Located in the top of the bellhousing. Care
must be taken not to damage the sensor or corre-
sponding wires during engine removal and installa-
tion.
(79) Using the engine lifting device, pull the
engine assembly away from the transmission approx-
imately three inches and stop.
(80) Working between the bulkhead and the right
rear of the engine assembly, disconnect the engine
misfire sensor electrical connector.
Fig. 17 Transmission Support Crossmember
Fig. 18 Engine Mount Sill Plate Retaining Bolts -
Left Wheel Well
Fig. 19 Engine Mount Sill Plate Retaining Bolts -
Right Wheel Well
Fig. 20 Engine Mount Sill Plate Bolts - Leftside
9 - 18 ENGINE WJ
REMOVAL AND INSTALLATION (Continued)