Specifications

(18) Install the heater core coolant supply hoses on
the coolant line assembly (Fig. 43).
(19) Clip the wire harness on the coolant supply
lines (Fig. 43).
(20) Install the EGR vacuum supply hose on the
EGR valve.
(21) Install the fresh air inlet tube assembly on
the turbocharger. Clip the air filter cover in position
and connect the breather hose (Fig. 44).
(22) Install the intercooler inlet hose on the vehi-
cle (Fig. 44).
(23) Raise the vehicle on the hoist.
(24) Install the turbocharger oil return hose on the
turbocharger.
(25) Install the exhaust system inlet pipe on the
turbocharger (Fig. 45). Torque the bolts to 22 N·m
(194 in. lbs.).
(26) Lower the vehicle on the hoist.
Fig. 42 Transmission Dipstick Tube Support Bracket
Fig. 43 3.1L Diesel Engine
Fig. 44 Air Intake Hoses
Fig. 45 Exhaust System Inlet Pipe Retaining Bolts
WJ ENGINE 9 - 27
REMOVAL AND INSTALLATION (Continued)