Specifications

CHAPTER 4
OPERATION
4-3
DT-203X, DT-105X and DT-110X display series
4.3.3.7. Parameter 7: Stop Bits
Selects the transmission number of stop bits. Select 1 or 2.
4.3.3.8. Parameter 8: Serial input
Selects the transmission type of serial line: RS-232 or RS-485/RS-422.
4.3.3.9. Parameter 9: Test serial L.
Selects the transmission test of serial line. There are three levels :
0 = No test
1 = Test transmission errors
2 = Test transmission errors and display address error.
4.3.3.10. Parameter 10: Date
Allows you to modify the display date.
4.3.3.11. Parameter 11: Time
Allows you to modify the display time.
4.3.3.12. Parameter 12: End
To exit modify parameter menu, push advance (“*”).