Specifications

CHAPTER 1
INTRODUCTION
1-1
DT-203X, DT-105X and DT-110X display series
1. INTRODUCTION
The alphanumerical displays for series DT-203X, DT-105X and DT-110X, are industrial displays
for control by RS-232 and RS-485 serial interface, which can be configured to work with several
protocols.
The selection of the parameters and the communication protocol is done using two
buttons with a system of easily programmable menu.
One of its main characteristics is the height of the characters:
DT-203X of 30mm, readable from up to 15m.
DT-105X of 50 mm, readable from up to 25m.
DT-110X of 100 mm, readable from up to 50m.
As with other display series, the DT-203X, DT-105X and DT-110X series is also
available in one or two-sided versions, which provides multiple solutions and installation
possibilities.
It is surface mounted, with fixtures to a wall or partition wall, or suspended by the side
anchoring.
The application field of these displays is very wide in all types of industrial applications.
They can be used to display Scada program values, counter values from a PLC, warning
messages, and advertisements.
RS-232/485