Instructions / Assembly

The door jambs reinforce the door
opening and provide an attractive
trim. The splice posts support the
walls.
1 Position splice post at the center
of the rear wall and fasten using nuts
and bolts into rear wall angle and
screws into rear floor frame.
Hint: Measure or count holes to de-
termine if post is centered on rear.
2 Fasten side splice posts to the
sides of building using screws.
Angled end of posts must be on top.
3 Fasten the top of the door jambs
to the door track with two screws. Do
the same for the bottom into frame.
Notched edge faces toward center of
building.
● ●
● ●
● 9195 Splice Post (1)
●●
●●
● 9198 Side Splice Post (2)
●●
●●
● 9194 Door Jamb (2)
● Parts Needed For ●
Splice Post/Door Jamb
Step 7
SW20
20
STEP
3
1
STEP
STEP
2
ANGLED END OF
SPLICE POST MUST
BE ON TOP
9198
9198
9195
9194
9194
FRONT
NOTCHED EDGE
MUST FACE CENTER
OF BUILDING
Washer
FRONT