Instructions / Assembly

ManualsBrandsArrow ManualsStorage & OrganizationMilford 10 ft. x 12 ft. Vinyl Storage Building

● Parts Needed For ●

Roof Beam/Braces

Step 14

SW27

●●

●●

● Main Roof Beam Assembly (1)

●●

●●

● Single Roof Beam Brace Assembly (2)

●●

●●

● 9204 Roof Beam Brace (2)

27

1 Wrap the weather stripping tape

around the two joined edges of the

left and right gables. See diagram.

Cut the weather stripping to length

and repeat on next gable set.

2 Spread the two halves of the double

roof beam and fasten to the gable

brace of the front gable.

3 Fasten the other end of the double

roof beam to the gable brace of the

rear gable.

STEP

6

STEP

2

Roof Beam Brace 9204

STEP

7

Roof Beam Brace 9204

4 Fasten the single roof beams,

small holes on top

, as shown using

bolts and nuts.

5 Fasten a roof beam brace to the

double roof beam behind the front

gable by placing the tab on the end of

the brace

between

the roof beams.

Align the tab with the

second

hole

and fasten the brace with a bolt and

nut.

6 Fasten the lower end of the roof

beam brace to the track support

with a bolt and nut.

7 Fasten a roof beam brace be-

tween the rear gable and the roof

beam at the

first

hole, as shown.

STEP

5

STEP

4

STEP

3

Roof Beam (Single)

STEP

1

Weather Stripping

Spread Two Halves

Of Roof Beams

Roof Beam (Double)