Instructions / Assembly

Step 2
G15
15
● Parts Needed For ●
Frame Assemblies
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled at the top edge of the side
walls and the rear wall. Proceed as
follows:
1 Overlap the rear wall angle pieces
as shown in the figure and fasten
them together with
one bolt and nut in
the center hole
.
2 Make two side wall angles by
overlapping the side wall angle
pieces as shown. Fasten each set
together with one bolt and nut in the
center hole .
3 Double check the length of each
and set these pieces aside for later
use.
●●
●●
● 5986 Rear Wall Angle (2)
● ●
● ●
● 8841 Side Wall Angle (4)
Rear Wall Angle
118 1/8" 300,0 cm
5986
5986
8841
8841
Side Wall Angles
89 7/8" 228,3 cm
Side Wall Angles
89 7/8" 228,3 cm
Rear Wall Angle
118 1/8" 300,0 cm