Instructions / Assembly

The studs provide a surface for at-
taching the siding panels.
1 Following dimensions, measuring
from the ends of angles, place a stud
between each corner and splice post.
Position stud inside top angle and
fasten with a screw.
2 Rest bottom tab (large hole) out-
side floor frame. Do not fasten tab at
this time. Repeat procedure for the
remaining studs around the building.
●●
●●
● 9199 Siding Stud (6)
● Parts Needed For ●
Studs
Step 8
G21
21
9199
LARGE HOLE
DO NOT FASTEN
TAB AT THIS TIME
29 3/16"
74,1 cm
22 1/16"
56,0 cm
FRONT