Instructions / Assembly

1 Lift and fasten a right and left
gable, under angle at corner, to the
rear wall angel with screws.
Hint: On the rear gable, use a bolt
and nut at the overlapping rear wall
angle. On the front gable, leave out 2
screws closest to center gable leg.
2 Join the left and right gables
together with a gable brace using a
bolt and nut in the second hole from
the bottom only .
3 Repeat Steps 1 & 2 for the door
track on the front of building, except
for the track supports, fasten as
shown.
●●
●●
● Left Gable Assemblies (2)
●●
●●
● Right Gable Assemblies (2)
●●
●●
● 9009 Gable Brace (2)
● Parts Needed For ●
Gables/Braces
Step 12
G25
25
STEP
2
STEP
3
STEP
9009 Gable Brace
Track Supports 6228
Gable
1