Installation Guide

1 Attach the right and left side
roof trim to the lower end of the roof
panels on each side of the building
using screws at each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2 Using your thumb and index fi nger,
overbend the bottom fl ange of the
side roof trim at the corner inward
enough so the right and left roof trim
caps fi t onto right and left corners.
3 Fasten the roof trim caps to the
side trim using a screw.
4 Fasten the roof panel ribs, peak
caps and ridge caps together using
bolts and nuts.
 8485 Left Side Roof Trim (2)
 8836 Right Side Roof Trim (2)
Step 16
D29
 Parts Needed For 
Roof Trim
STEP
1
8836
STEP
Peak Cap
Roof Trim
STEP
2
4
8485
8485
8836
Roof Trim Cap
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
STEP
3
29