Instructions / Assembly

39
● Parts Needed For ●
Side or Rear Entry Door All Sizes
Step 28
BW39
●●
●●
● Door Assembly (1)
STEP
2
STEP
1
STEP
4
STEP
3
1Position door slides onto the legs,
from the end of door track, as shown
in the end view.
2From inside the building, put the
bottom of the door behind door jamb
into the lower door track.
3Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
4Fasten the door to the door slides
using two #10Bx1/2" screws per door
slide.
NOTE
The holes in the door slides allow
you to adjust the door. Place the
door in the middle holes.
END VIEW
OF TRACK
Lower Door Track
#10Bx1/2" Screw
Horizontal Door Brace
Door
Adjustment Holes Allow
Door to Meet Evenly
Along Its Length