Instructions / Assembly

1 Fasten side floor frames together
with a column gusset using 2 bolts
from the bottom and nuts on top. At
rear of building, repeat procedure.
2 Position center column assem-
blies where floor frames are joined
and fasten to gusset with 8 bolts.
Repeat procedure on sides of build-
ing for the 14x31.
NOTE
Support center columns with
stakes or other means until wall
panels are attached.
3 Measure the floor frame diago-
nally. When the diagonal measure-
ments are equal, the floor frame is
square.
Step 5
BX20
● Parts Needed For ●
Gusset/Center Column
20
STEP
2
NOTE
Do not fasten the floor frames to
your foundation at this time.
You will anchor the building
after it is erected.
The floor frame must be square
and level or holes will not align.
●●
●●
● 6947 Column Gusset (3 14x21) (5 14x31)
●●
●●
● Center Column Assembly (3 14x21)
●●
●●
● Center Column Assembly (5 14x31)
6947STEP
3
9490
9490
6947
(1431)
6947
6947
6947
9490
9490
9490
FRONT
STEP
1
9490
9490
9490
6947
(1421)
6947
6947
FRONT