Instructions / Assembly

33
● Parts Needed For ●
Roof Panels
Step 18
STEP
STEP
3
BX33
●●
●●
● 9491 Roof Panel (4)
1Position a roof panel overlapping
rib of left corner roof panel. Fasten
overlap at center of roof panel rib
using a bolt and nut. Fasten to roof
beams as done before using screws.
2Install a roof panel on the left side
of building. Repeat procedure with 2
more roof panels working side to
side. At the top beam end of panels,
fasten 2nd roof panel rib overlaps
with a bolt and nut.
3Cut the weather stripping tape
into 6 strips, each strip about 2" (5cm)
long. Press 2 strips over the bolt
heads on overlaps at the top of pan-
els. Save the other 4 strips for the rest
of roof.
4Cover the join at the peak with
weather stripping tape. Unroll the
tape and press it down over the open-
ing at the ridge as you install each
roof panel. Do not cut the tape at this
time.
STEP
1
ROOF PANEL
SCREWS TO ROOF BEAM
SLOTTED
HOLES AT
TOP
FASTEN
AT
OVERLAP
FIRST
SCREWS TO
ROOF BEAM
SMALL
HOLES
AT BOTTOM
Weather Stripping Tape
9491
Crimped Rib is Always Overlapped
by Wide Rib of Adjacent Panel
Weather
Stripping
Tape
4
STEP
2
NOTE
On the 1431, cut the weather
stripping tape into 10 strips.
Follow Fastener Sequence