Instructions / Assembly

37
● Parts Needed For ●
Roof Trim
Step 22
BX37
●●
●●
● 7023 Left Roof trim (2)
●●
●●
● 7024 Right Roof Trim (2)
●●
●●
● 9510 Side Roof Trim (6)
●●
●●
● 9513 Side Roof Trim (2 1431)
1Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2Position left and right roof trim to
the ends of roof, noting that trim slips
under ridge cap, but fits on top of side
roof trim.
3Fasten roof panel rib, trim, peak
cap and ridge cap together using
bolts and nuts. Fasten the remaining
peak cap in the same manner.
4Using your thumb and index finger,
overbend the bottom flange of the
side roof trim at the corner inward
enough so the right and left roof trim
caps fit onto right and left corners.
5Fasten trim to side trim using a
screw and washer into roof panel.
6Fasten the roof trim caps to the side
trim using a screw.
7024
4
STEP
3
STEP
2
STEP
5
STEP
6
STEP
7023
Peak Cap
Roof
Trim
Cap
9510
9510
9510
1
STEP
Arrow Logo
Goes on Front
of Building
9510
9513
9510
9510
(1431)
(1421)