Use and Care Manual

6
Step 1: Floor Frame Pre-Assembly
13
13R
You will need for this page:
10703
Front/Rear
Floor Frame
4
(QTY: 8)
SB
Join two (2) Front/Rear Floor Frames together by overlapping them as shown and secure the
Frames with four (4) Stone Bolts and Nuts. Repeat this for the other two (2) Front/Rear Floor
Frames.
1
Check the overall length of each set of Floor Frames to make sure they are at the proper length
of 119 3/8” (303,2 cm).
2
119 3/8” (303,2 cm)
Washers are to be
used on painted
parts only. Washers
are not necessary on unpainted
parts and there are not enough
to use on every Screw and Bolt.
10703
10703
BUILD TWO (2) ASSEMBLIES