Use and Care Manual

6
Step 2: Frame Pre-Assembly
14
14R
You will need for this page:
(QTY: 1)
SB
(QTY:2)
SS
Connect the Front Inner Header to a Front Outer Header using one (1) Stone Screw as
shown. Repeat this for the opposite end.
1
Join the Left and Right Rear Wall Angles using one (1) Stone Bolt and Nut as shown.
2
10707
Front Inner
Header
1
10708
Front Outer
Header
2
9338
Right Rear
Wall Angle
1
9339
Left Rear
Wall Angle
1
SB
93389339
Check the overall length of the Header and Rear Wall Angle sets to make sure they are at the
proper length of 118 1/8” (300,0 cm).
3
Rear Wall Angle
Header
118 1/8” (300,0 cm)
118 1/8” (300,0 cm)
10707
10708
SS
10708
10708
10707
SS