Use and Care Manual

6
16
16R
You will need for this page:
(QTY: 20)
SB
Place two (2) 2” (5,1 cm) Roof Beams back-to-back with small holes on top. Fasten together
using four (4) Stone Bolts and Nuts. DO NOT FULLY TIGHTEN.
1
Repeat process to make three (3) more assemblies.
Set assemblies aside for later use.
2
Step 4: Roof Beam Assembly
10778
Roof Beam
8
BUILD FOUR (4) ASSEMBLIES
10778
10778
End view of Roof Beam
Side of Beams with small holes must face up.
10777
Roof Beam
2
Place two (2) 4” (10,2 cm) Roof Beams back-to-back with small holes on top. Fasten together
using four (4) Stone Bolts and Nuts. DO NOT FULLY TIGHTEN. Set assembly aside for later
use.
3
10777
10777