Use and Care Manual

6
Step 9: Posts/Frame
22
22R
You will need for this page:
Fasten Header Assembly to top of front
Corner Posts through top holes using two
(2) Stone Screws.
2
Position Right and Left Corner Posts
at the corner of the Floor Frame as
shown. The angled end of each Post
must be placed on top of all four (4)
corners. Fasten the Corner Post to
the Floor Frame using two (2) Stone
Screws in each Post.
1
5284
Right Corner
Post
2
The Floor Frame must be square
and level or holes will not align.
(QTY: 22)
SS
Assemblies from step 2:
• Header Assembly (1)
• R e a r W a l l A n g l e
Assembly (1)
5285
Left Corner
Post
2
10779
Side Wall
Angle
2
5284
5284
5285
5285
10779
Front
Rear Wall Angle Assembly
Header Assembly
Fasten Rear Wall Angle Assembly to top
of back Corner Posts using two (2) Stone
Screws in each Post.
3
Fasten Side Wall Angles to top of side
Corner Post using two (2) Stone Screws
in each Post.
4
Support the Corner Posts with
stakes or other devices until
Door Jambs are attached.
Wall Angles must face inside
building.
Side Wall Angle on top
Long leg of Rear Wall Assembly
and Side Wall Angles faces
down.
Leg of Header Assembly
to inside of building and
faces down.
10779