Use and Care Manual

Step 16: Roof Beams/Braces

30R

You will need for this page:

Secure the Roof Beam Assemblies

to the Gables as shown using two (2)

Stone Bolts and Nuts on each end of

each Roof Beam Assembly.

Assemblies from step 4:

• Roof Beam Assembies (5)

(QTY: 20)

Side of Beams with small

holes must face up.

Spread two (2) halves

of Roof Beams

At this time, take a moment to

ensure the building is level and

square. Measure the building diagonally again to make sure the

building is square. The building should be square at the base

and at the top. This will make Roof Panels ﬁ t better and holes will

better align.

IMPORTANT:

10777

10778