Instructions / Assembly

6
Step 10: Splice Post/Door Jamb
23
23P
You will need for this page:
Align top hole on notched side of one (1)
Door Jamb with hole closest to center
on the Header. Fasten Door Jamb to
the Header and Frame using four (4)
Stone Screws in Door Jamb. Repeat
for other Door Jamb.
2
Position Splice Post at the center of the
rear wall and fasten using two (2) Stone
Screws into rear Floor Frame and four
(4) Stone Bolts and Nuts into Rear Wall
Angle Assembly.
1
10780
Right Door
Jamb
1
(QTY: 6)
SS
80069
Left Door
Jamb
1
5287
Rear Splice
Post
1
5287
5287
5287
SB
(QTY: 4)
SB
Notched edge must
face center of building.
10780
Support the Corner
Posts with stakes or
other devices until Door
Jambs are attached.
80069
Add Washers to
Screws on holes
closest to center.
10780
(QTY: 4)
SS
SS
SS
SS
SS
SS
SS
SS
SS
Front
Rear