Instructions / Assembly

6
Step 13: Rear Siding
26
26P
You will need for this page:
Slide bottom Rear Siding Panels into channels of Corner Posts and Splice Post as shown.
Once in place, secure with four (4) Vanilla Screws per Panel. Screws going into bottom Floor
Frame also secure Stud Assemblies.
1
(QTY: 24)
SS
Screws also secure
Stud Assemblies to
Floor Frame.
Slide remaining Panels into channels, making sure Siding Panels overlap as shown. Once
overlapped, fasten each Panel using four (4) Vanilla Screws as before.
2
From inside building, fasten all Rear Siding Panels to Corner Posts and Splice Post using four
(4) Stone Screws per Panel.
4
Be certain all Siding Panels are
completely overlapped or holes
will not line up.
Secure the tops of Panels to Rear Wall Angle using an additional two (2) Vanilla Screw per
Panel.
3
10792
Rear Siding
6
10792
10792
10792
10792
10792
10792
(QTY: 28)
VS
SS
SS
VS
VS
VS