Instructions / Assembly

Step 2
ST15
15
● Parts Needed For ●
Frame Assemblies
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
1 Overlap the right & left rear wall
channel pieces as shown in the fig-
ure and fasten the two pieces to-
gether with 4 bolts as shown.
2 Make two side wall channels by
overlapping the right & left side wall
channel pieces as shown. Fasten
each set together with 8 bolts.
3 Overlap the rear wall angle
pieces as shown in the figure and
fasten them together with one bolt in
the center hole (five holes will align) .
4 Make two side wall angles by
overlapping the side wall angle piec-
es as shown. Fasten each set togeth-
er with one bolt thru the second large
hole from the end of each part.
5 Set the assemblies aside. You will
use them later.
●●
●●
● 5986 Rear Wall Angle (2)
●●
●●
● 10391 Side Wall Angle (4)
●●
●●
● 10398 Right Side Wall Channel (2)
● ●
● ●
● 10399 Left Side Wall Channel (2)
●●
●●
● 9006 Right Rear Wall Channel (1)
●●
●●
● 9007 Left Rear Wall Channel (1)
STEP
STEP
2
9006
10398
Side Wall Channels
157 3/8" 4,0m
(2 Assemblies)
STEP
4
STEP
5
Rear Wall Channel
118 1/8" 3,0m
3
1
9007
10399
Rear Wall Angle
118 1/8" 3,0m
5986
5986
10391
Side Wall Angles
157 3/8" 4,0m
10391
Rear Wall Angle 118 1/8" 3,0m
Side Wall Angles 157 3/8" 4,0m (2 Assemblies)
Rear Wall Channel 118 1/8" 3,0m
Side Wall Channels 157 3/8" 4,0m (2 Assemblies)
STEP