Installation Guide

 Side Wall Channel Assemblies (2)
 Rear Wall Channel Assembly (1)
 9003 Stud (10)
 9365 Front Wall Channel (2)
 Parts Needed For 
Mid Frames/Studs
Step 9
ST22
1 Wearing gloves, bend the tabs on
each mid wall channel down.
2 Fasten side wall channel assem-
blies to the sides of building at the
splice and corner posts using screws.
3 Fasten the rear wall channel as-
sembly across the rear of building
overlapping side channels and fas-
tening corners using bolts and nuts.
4 Following dimensions, place studs
between corner and splice post. Posi-
tion stud inside top angle and fasten
with a screw.
5 Fasten middle of stud to channel
with a screw from inside building.
STEP
1
48 13/16" 124,0 cm
29 3/16" 74,1 cm
BEND 2 TABS
DOWNWARD
Rear Wall
Channel
Assembly
STEP
STEP
9365
STEP
STEP
2
6
5
STEP
4
STEP
7
28 1/4"
72 cm
3
6 Rest bottom tab of stud outside
 oor frame, but do not fasten at this
time. Repeat procedure for the re-
maining studs around the building.
7 Fasten front wall channel to the
door jamb and corner post using
screws.
9365
9003
DO NOT FASTEN TAB
AT THIS TIME
Side Wall
Channel
Assembly
Side Wall
Channel
Assembly
22