Instructions / Assembly

The splice posts support the walls.
1 Position a rear splice post at the
center of the rear wall and fasten
using 2 nuts and bolts into rear wall
angle and 2 screws into rear floor
frame.
Hint: Measure or count holes to de-
termine if post is centered on rear.
2 Fasten side splice posts to the
sides of building using screws into
side wall angles and side floor frames.
Angled end of post must be on top.
●●
●●
● 8718 Rear Splice Post (1)
●●
●●
● 8734 Side Splice Post (2)
● Parts Needed For ●
Splice Post
Step 7
ST20
20
8734
STEP
FRONT
ANGLED END OF
SPLICE POST MUST
BE ON TOP
8734
8718
2
STEP
1
8718