Instructions / Assembly

● Parts Needed For ●
Roof Beam/Braces
Step 13
SS26
●●
●●
● Main Roof Beam Assembly (1)
●●
●●
● 6227 Roof Beam Brace (2)
26
1 Fasten the track supports to the
front gable assembly only, as shown.
2 Wrap the weather stripping along
the mating edge of the large left and
right gables as shown. Cut the
weather stripping to length.
3 Spread the two halves of the double
roof beam and fasten to the gable
brace of the front gable.
STEP
6
STEP
2
Roof Beam Brace 6227
STEP
7
Roof Beam (Double)
4 Fasten the other end of the double
roof beam to the gable brace of the
rear gable.
5 Fasten a roof beam brace to the
double roof beam behind the front
gable by placing the tab on the end of
the brace between the roof beams.
Align the tab with the fourth hole and
fasten the brace with a bolt and nut.
6 Fasten the lower end of the roof
beam brace to the track support
with a bolt and nut.
7 Fasten a roof beam brace be-
tween the rear gable and the roof
beam at the third hole, as shown.
STEP
5
STEP
4
STEP
3
Spread Two Halves
Of Roof Beams
STEP
1
Track Supports 6228
Weather Stripping
Roof Beam Brace 6227