Instructions / Assembly

1 Attach the right and left side roof
trim to the lower end of the roof pan-
els on each side of the building using
screws at each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2 Using your thumb and index fin-
ger, overbend the bottom flange of
the roof panel trim at the corner
inward enough so the right and left
roof trim caps fit onto right and left
corners.
3 Fasten the roof trim caps to the
side trim using a screw.
●●
●●
● 6893 Left Side Roof Trim (2)
●●
●●
● 6892 Right Side Roof Trim (2)
●●
●●
● 6015 Side Roof Trim (2)
Step 18
ST31
● Parts Needed For ●
Roof Trim
STEP
STEP
3
6892
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
31
2
STEP
1
6015
6893
6893
6015
6892
Roof Trim Cap
Roof Trim