Installation Instructions

1 Install three ridge caps on the
completed roof section using bolts
and nuts. Do not fasten the ends of
ridge caps until instructed to do so.
2 Fasten the remaining left and right
roof panels as you unroll the weather
stripping tape, and press it down,
install the second ridge caps over-
lapping the first ridge caps. Align the
holes and fasten using bolts and nuts.
Cover the notched areas of the roof
panels with strips of weather strip-
ping tape.
3 Fasten the lower end of the panels
to the side wall angles using screws
and washers. Use bolts and nuts
through wall angle overlaps at the
bottom of panel.
●●
●●
● 8742 Ridge Cap (6)
●●
●●
● 7953 Left Roof Panel (1)
●●
●●
● 7952 Right Roof Panel (1)
Step 15
M28
● Parts Needed For ●
Ridge Caps & Panels
STEP
1
8742
STEP
28
8742
8742
8742
7953
STEP
3
7952
8742
8742
Cut
Weather Stripping
and Fold Under
2