Installation Instructions

1 Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2 Using your thumb and index fin-
ger, overbend the bottom flange of
the side roof trim at the corner inward
enough so the right and left roof trim
caps fit onto right and left corners.
3 Fasten the roof trim caps to the
side trim using a screw.
4 Fasten the roof panel rib, peak
cap and ridge cap together using
bolts and nuts. Fasten the remaining
peak caps in the same manner.
●●
●●
● 8743 Side Roof Trim (4)
Step 16
M29
● Parts Needed For ●
Roof Trim
STEP
1
8743
STEP
Peak Cap
Roof Trim
STEP
2
4
8743
8743
8743
Roof Trim Cap
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
STEP
3
29