Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationWoodahven 10 ft. x 9 ft. Steel Storage Shed with Floor Kit

1 Attach the side roof trim to the

lower end of the roof panels on each

side of the building using screws at

each panel overlap.

NOTE

A single screw fastens both trim

pieces at the overlap.

2 Using your thumb and index  nger,

overbend the bottom  ange of the side

roof trim at the corner inward enough

so the right and left roof trim caps  t

onto right and left corners.

3 Fasten the roof trim caps to the

side trim using a screw.

4 Fasten the roof panel rib, peak cap

and ridge cap together using bolts

and nuts. Fasten the remaining peak

caps in the same manner.

 8743 Side Roof Trim (4)

Step 16

M29

 Parts Needed For 

Roof Trim

STEP

1

8743

STEP

Peak Cap

Roof Trim

STEP

2

4

8743

8743

8743

Roof Trim Cap

Tuck Flange

Inward to Fit

Inside of

Roof Trim Cap

STEP

3

29