Installation Guide

1 Position corner posts at the
corners of the fl oor frame as shown.
Fasten the corner post to the fl oor
frame with 2 screws.
Support the corner posts with stakes
or other devices until door jambs are
attached.
2 Fasten the door track assembly
(holes on top) behind the top of the
front corner posts using 1 screw in
each corner. See the fi gure.
3 Fasten the rear wall angle be-
hind the top of the rear posts using
2 screws in each post.
4 Fasten the side wall angles be-
hind the top of the side posts using
2 screws in each corner. Side wall
angles overlap rear wall angel in
corners.
 5288 Corner Post (4)
 Door Track Assembly (1)
 9907 Rear Wall Angle (1)
 9912 Side Wall Angle (2)
Step 3
BH16
 Parts Needed For 
Posts/Top Frames
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
The fl oor frame must be square
and level or holes will not align.
STEP
1
9907
5288
REAR
FRONT
SIDE
TOP VIEW
STEP
3
STEP
2
STEP
4
SIDE
5288
5288
5288
9912
9912
9396
Opening
Facing In
Long Leg
on Top
Short Leg
on Bottom
FRONT
Short Leg
on Top
Wall Angles
Must Face
Inside
Building
Door Track Assembly
16