Installation Guide

The gables go on top of the front and
rear walls to support the roof beams.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
1 Lift and fasten a right and left
gable, under angle at corner, to the
door track with screws.
2 Join the left and right gables
together with a gable brace using a
bolt in the bottom 2 holes.
Repeat Steps 1 & 2 for the opposite
side of building.
Step 7
BH20
 Parts Needed For 
Gables/Braces
 5996 Right Gable (2)
 5997 Left Gable (2)
 6658 Gable Brace (2)
5997
1
STEP
2
STEP
6658 Gable Brace
5996
20